|
|
New LXI DC-18GHz Matrix Unit
System MS2010A Introduced
for Communication,
Telemetry, ATE and Broadcast Installations
 This
compact high performance 2RU unit provides an amazingly flexible
DC-18GHz matrix switch capability for system designers. It's available in
configurations from 2x4, to as large as 10x10.
The 2RU rack mountable
unit features optional dual hot-swap power supplies, built-in Ethernet
interface (optional GPIB and serial) plus rear
facing signal connectors (SMA or N-Type).
The MS2010A can be optionally configured with automatic input or
output terminations.
The plug-in LXI certified 10/100 Ethernet control CPU provides system
control and to
remotely monitor system health. For legacy needs, optional GPIB and
serial ports are available. Also, one or two self-monitoring hot-swap plug-in power supplies configure
the unit for single or redundant power needs. The unit is powered by
any international AC power source.
Popular
applications for the System MS2010A are as follows:
- Communication installations
- Airborne surveillance systems
- System front end for antenna routing
- Protocol or interface convertors
- Automated Test Equipment
Specifications:
Download
| Switch
Configuration (max) |
10 input, 10
output |
| Switch
Configuration (min) |
2 input, 4
output |
|
System Type: |
Blocking (1:1 connections, no fan-out) |
|
Switching Elements |
High
reliability relay |
| Signal
Path |
DC coupled
analog |
|
Frequency range |
DC-18GHz
(extended range available) |
|
Transmission Loss |
<4.5dB @ 18GHz |
|
Crosstalk Isolation |
<80dB @ 4GHz,
>60dB @ 18GHz |
|
VSWR |
<2:1 |
| Maximum
Signal Power |
100W @2.5GHz,
40W @18GHz (cold switching) |
| Input
Impedance |
50 Ohms |
| Output
Impedance |
50 Ohms |
| Port
Terminations |
Automatic input
or output terminations optional (2W) |
| Signal
Connectors |
SMA standard,
N-Type optional |
|
Configuration Memory |
199 complete
configurations |
| Path
Reliability |
>1,000,000
operations (per I/O) |
| Contact
Usage History |
Reporting
included |
| Power
Supply Section |
Hot-Swap
redundant with monitoring, single supply available |
| Local
Control |
Front panel VF
display and LED illuminated keypad |
|
Remote control |
LXI certified Ethernet (10/100), with GPIB and Serial
optional |
| AC
Power Requirements |
90-264VAC,
47-440Hz, <100W |
| AC
Inputs |
Dual with
6-foot 15A power cords included |
|
Operating Temperature |
0 to +60C |
|
Non-Operating Temperature |
-20C to +75C |
|
Humidity |
0 to 95%
(non-condensing @ 25C) |
|
Altitude |
<10,000 feet
ASL |
|
Mounting |
RETMA slots
(EIA), 2RU high, chassis slide mount holes included |
|
Estimated Weight |
<40lbs (10x10) |
|
Dimensions |
3.50"H x
19.00"W x 26.00"D |
Request more information
on the MS2010A or any of our products
HERE or email
sales@uswi.com
| NOTE: Universal Switching Corporation's policy is
one of continuous product
development and improvement. Consequently, the company reserves the right
to vary from the descriptions and specifications stated herein. |
|
|
|
|
