New Modular RS-530 Digital 24x24 Matrix Unit
System S24530 Introduced

for Communication, Telemetry, ATE and Broadcast Installations

The System S24530 is a digital switch array specifically designed for routing RS-530 signals. Fully populated, this unique unit contains 24 DTE ports that can be connected to 24 DCE ports. All RS-530 signals are routed on the DB25 connectors. The unit is configurable from 3x3 to 24x24 in independent (DCE, DTE) increments of three ports.

The 5RU rack mountable unit can be populated with up to eight DCE modules and eight DTE modules, each containing 3-ports. These modules install at the rear of the unit with the ports rear facing. 

 

Front view showing display and keypad. Hinged front panel provides access to digital switch core modules.

All modules are secured to the unit with stainless hardware for rugged and trouble free operation. For smaller configurations, filler plates for the rear complete the user configuration.

For remote operation, one or two (redundant) plug-in LXI certified 10/100 Ethernet modules are installed to remotely monitor system health, and to control the unit. Serial and GPIB control is optional.

Two self-monitoring hot-swap plug-in power supplies configure the unit for redundant power (standard). The unit is powered by any international AC power source.

 

DCE and DTE modules install from the rear and the digital switch core modules at the front.
Connectivity Diagram	Signal Direction Diagram