Product Applications
The programmable switching solutions and requirements listed below will solve just
about any application requiring an automated switching system. Please keep in mind that
the items here are representative of our capabilities and should not be considered
comprehensive.
Applications for our Products
 Audio
Single and multi-level matrices up to 512x512
Balanced, unbalanced, buffered (full fanout), unbuffered
Routers for conference centers and studios
Distribution amplifiers
Audio following video, or with breakaway
Airborne communications
Video
Single or multilevel matrix switching with or without buffering
Standard, High or Ultra High resolution (DC to 400MHz)
Composite video routers for NTSC or PAL
Digital video (component) routers to 400Mbit/s
RGB video routers for simulators, production areas and studios
RGBS / RGBSHV routers
Video distribution amplifiers
Radar
X-Y-Z switching arrays
X-Y-Z distribution and routing
Vibration Labs
Distribution and switching of transducers and accelerometers
Routing of test signals to automated test equipment
ATE stations and Test Labs
Routing of test points to automated test equipment
Switching of stimulus signals to UUT (unit under test)
Expanding capability of network, spectrum and other analyzers
Routing power to UUT's
Connecting test points to DVM, noise meters or distortion analyzers
T1 and T3 data routing for ATE applications
Instrumentation Control
Switching of stimulus signals
Distribution and switching of transducers and accelerometers
Digital Data
Switching and distribution of high speed ECL data (1.4Gbit/s)
Routing of differential Clock and Data
Multiple wire data switching (up to 25 wires deep)
Differential RS-422 type data switching
T1 and T3 data routing for ATE applications
Telemetry
Switching of IRIG timing data
Clock and Data routing and distribution
LVDS data routing
Automated and manual timing solutions
Uplinks and Downlinks
Switching and routing of IF signals
Routing of microwave signals
IF signal distribution
Airborne signal routing
Airborne Surveillance Systems
Switching of radar video signals
Routing of IF signal data
Microwave signal routing
Audio and intercom communications routing
High resolution video switching for situation screens
Communications
HF and RF antenna switching arrays
Antenna distribution
Audio communication switching and/or distribution
Microwave Signals
Antenna feed routing
Network analyzer switching to UUT's
Connecting multiple inputs to a Spectrum Analyzer
Switching inputs to a noise meter
Connecting different transmitters to a single antenna
|
